Driva Plasterboard Fixing

Driva ® Self Drilling Plasterboard Anchor

Description

Suitable Substrates

• Plasterboard - Dry partition walls
• Aerated concrete (with predrilled hole Ø 8mm)

Applications

• Bathroom accessories
• Fuse boxes
• Radiators (Driva Plus only)
• Bracketry
• Signage
• Mirrors
• Dado Rails

Product Advantages

• High-strength body in Zamak 3
• A range of fixings for different applications
• Positive tightening of the anchor
• No need for pre-drilling
• Driva Plus combines screw and clamp fixing
• Corrosion resistant
• Point breaks away if an over long screw has been used
• Removable
• Head sits flush behind fixture
• Low profile head
• Screw thread profile designed for efficient cutting and ensures positive lock
• No maximum or minimum plasterboard thickness (excluding Driva Plus)

Specification

One piece self drilling anchor designed for fastening light / medium loads to plasterboard. For use in plasterboard, simply screw using a normal or power screwdriver. The point drills a pilot hole followed by a coarse, specifically designed helical thread biting into the plasterboard substrate making the fix. The separate screw is then used to mount the fixture.

When using standard Driva® in aerated concrete it is necessary to drill a 8mm diameter pilot hole.

Driva® Plus works in the same way as Driva® in plasterboard, but is designed for fixing heavier loads. The additional hinged toggle swivels and pulls towards the inner face of the cavity through the action of the mounting screw. This gives a combined screw and clamp fix.

Mini Driva® is used on its own, whereas other Driva® products require a screw to secure the fixture and in the case of Driva® Plus, rotate the toggle.

Material

Anchor Body: Zamak 3 - Driva ®, Driva® Plus, Mini Driva® Glass Fibre reinforced nylon polyamide - Driva° LD.

Installation

1. Using a N°.2 Phillips screwdriver place
fixing point against the plasterboard.

2.Screw the fixing into the plasterboard until the fixing is flush with the plasterboard surface.

3.0ffer up item to be fixed.

4. Using the screw provided, screw into the Driva body to achieve fix.

A.Installation for Driva® original, LD and Speed Plug.

B.Installation for Driva® Plus.

C.Installation for Mini Driva®

Data